COMMITTED TO BECOMING YOUR MOST DEVOTED PARTNER
Search
Close this search box.

INSTALLATION AND TEST POINTS OF DISC GRANULATOR

首页 / 新闻 / Blog

Disc Granulator is a kind of granulator, the granulation success rate can reach more than 93%. The application of this machine greatly reduces labor intensity and improves labor efficiency.

1. Specific installation points:
1) The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2) Pay attention to the verticality of the main body and the horizontal when installing.
3) After installation, check whether the bolts in each part are loose and whether the door of the main engine is fastened. If so, please fasten it.
4). Configure the power cord and control switch according to the power of the equipment.
5) After the inspection is completed, a no-load test run is carried out, and the test run is normal and production can be started.
2. Points to note when the equipment is put into production:
1). Check whether the reducer is filled with gear oil and whether the rotation direction of the disc is correct before starting the equipment.
2). After running and pressing the start button, the host starts, and observe whether the equipment is operating normally, whether there is vibration, and whether the rotation is stable.
3). Feeding and watering can be carried out after the filling and equipment of the granulator are operating normally.
4). After using granulation adjustment and filling, you can adjust the angle of the disc according to the requirements to make the granules reach the required size.

联系我们

有问题或需要报价?
无论您是否确切地知道自己需要什么,
或者您不确定从哪里开始,我们可以提供帮助。

滚动至顶部